Aluminum Button Stop
Holding strength is approximately 1/3 of rated cable strength when properly swaged. However, to determine the exact holding strength, PULL TESTING IS ESSENTIAL prior to use. This step insures the proper selection of materials, the correct swaging procedure, and an ample margin of safety for the intended use. 
- Adds Stop to Wire Rope to Prevent Pulling through a Guide
- Warning: Not designed for load carrying purposes. Not to be used in overhead lifting or hoisting applications. Do not exceed work load limit.
| Rope Size & Sleeve Size |
A Outside Diameter |
B InsideDiameter |
C Length |
Approx. Wt. Per 1000 Pcs. |
| 1/16 | .250 | .078 | 5/32 | .72 |
| 5/64 | .250 | .094 | 5/32 | .64 |
| 7/64 | .250 | .109 | 5/32 | .60 |
| 3/32 | .344 | .112 | 5/16 | 2.48 |
| 1/8 | .344 | .152 | 5/16 | 2.30 |
| 5/32 | .437 | .185 | 11/32 | 4.10 |
| 3/16 | .437 | .216 | 11/32 | 3.62 |
| 7/32 | .437 | .250 | 11/32 | 3.30 |
| 1/4 | .688 | .281 | 11/16 | 20.5 |
| 9/32 | .688 | .312 | 11/16 | 19.25 |
| 5/16 | .688 | .375 | 11/16 | 17.4 |
| 3/8 | .688 | .406 | 11/16 | 16.4 |